ATS01N222LU

Main

[TAG[ hide ]]
range of product Altistart 01  
product or component type Soft starter  
product destination Asynchronous motors  
product specific application Simple machine  
device short name ATS01  
network number of phases 3 phases  
[Us] rated supply voltage 200...240 V - 10...10 %  
motor power kW 5.5 kW 3 phases 200...240 V
4 kW 3 phases 200...240 V
 
motor power hp 7.5 hp 3 phases 200...240 V
5 hp 3 phases 200...240 V
 
IcL starter rating 22 A  
utilisation category AC-53B EN/IEC 60947-4-2  
current consumption 110 A at nominal load  
type of start Start with voltage ramp  
power dissipation in W 124.5 W in transient state
4.5 W at full load and at end of starting
 
 
Complementary

[TAG[ hide ]]
assembly style With heat sink  
function available Integrated bypass  
supply voltage limits 180...264 V  
supply frequency 50...60 Hz - 5...5 %  
network frequency 47.5...63 Hz  
output voltage <= power supply voltage  
[Uc] control circuit voltage Built into the starter  
starting time Adjustable from 1 to 10 s
1 s 100
10 s 10
5 s 20
 
deceleration time symb Adjustable from 1 to 10 s  
starting torque 30...80 % of starting torque of motor connected directly on the line supply  
discrete input type Logic LI1, LI2, BOOST stop, run and boost on start-up functions <= 8 mA 27 kOhm  
discrete input voltage 24...40 V  
discrete input logic Positive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mA  
discrete output current 2 A DC-13
3 A AC-15
 
discrete output type Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO
 
discrete output voltage 24 V 6...30 V open collector logic  
minimum switching current 10 mA 6 V DC relay outputs  
maximum switching current 2 A 250 V AC inductive cos phi = 0.5 20 ms relay outputs
2 A 30 V DC inductive cos phi = 0.5 20 ms relay outputs
 
display type 1 LED green starter powered up
1 LED yellow nominal voltage reached
 
tightening torque 0.5 N.m
1.9...2.5 N.m
 
electrical connection 4 mm screw clamp terminal rigid 1 1...10 mm² AWG 8 power circuit
Screw connector rigid 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal rigid 2 1...6 mm² AWG 10 power circuit
Screw connector rigid 2 0.5...1 mm² AWG 17 control circuit
Screw connector flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
Screw connector flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal flexible with cable end 2 1...6 mm² AWG 10 power circuit
4 mm screw clamp terminal flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Screw connector flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
 
marking CE  
operating position Vertical +/- 10 degree  
height 154 mm  
width 45 mm  
depth 131 mm  
product weight 0.56 kg  
compatibility code ATS01N2  
power range 4...6 kW at 200...240 V 3 phases  
motor starter type Soft starter  
 
Environment

[TAG[ hide ]]
electromagnetic compatibility EMC immunity EN 50082-1
Damped oscillating waves level 3 IEC 61000-4-12
Electrostatic discharge level 3 IEC 61000-4-2
Immunity to electrical transients level 4 IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
Voltage/current impulse level 3 IEC 61000-4-5
Conducted and radiated emissions level B CISPR 11
Conducted and radiated emissions level B IEC 60947-4-2
EMC immunity EN 50082-2
Harmonics IEC 1000-3-2
Harmonics IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6
Micro-cuts and voltage fluctuation IEC 61000-4-11
 
standards EN/IEC 60947-4-2  
product certifications B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
CCC
CSA
C-Tick
GOST
UL
 
IP degree of protection IP20  
pollution degree 2 EN/IEC 60947-4-2  
vibration resistance 1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6
1 gn 13...150 Hz EN/IEC 60068-2-6
 
shock resistance 15 gn 11 ms EN/IEC 60068-2-27  
relative humidity 5...95 % without condensation or dripping water EN/IEC 60068-2-3  
ambient air temperature for operation -10...40 °C without derating
40...50 °C with current derating of 2 % per °C
 
ambient air temperature for storage -25...70 °C EN/IEC 60947-4-2  
operating altitude <= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m